Hydro Jetting; When a Snake Won’t Cut It

★★★★★ Rated 4.9 out of 5 stars

High-pressure water (1,500–4,000 PSI) scours grease, mineral scale, and root intrusion off the inside of the pipe. Camera-scoped before we jet so the line can take the pressure.

Dispatch Plumber
24/7
Emergency
Service
Trusted &
Recommended
Up-Front
Estimates

Every Hydro-Jetting Use Case

Grease Buildup (Kitchen / Restaurant)

Years of cooking grease coats the inside of the pipe. Snake punches a hole; hydro-jet scours it clean.

Tree Root Intrusion

Root masses that grew through joints in clay or cast iron. Jet cuts them out, restores full diameter.

Mineral & Scale

Hard-water scale narrows older galvanized lines. Jetting opens them back up; buys years before re-pipe.

Recurring Main-Line Backups

Snake-then-clog-back cycles are a sign of pipe-wall buildup. Jetting treats the whole pipe, not just the symptom.

Pre-Repair Cleaning

Before camera inspection, before liner installation, before sewer-line repair; jetting gives a clean view of pipe condition.

Safer for Pipes; When Done Right

PSI tuned to the pipe material. We don’t blast cracked clay or compromised cast iron without scoping first.

Simple, Transparent, Fast

From the moment you call to the moment we leave: no surprises, no hidden fees, no high-pressure upsells.

  1. 1

    Call Our Dispatcher

    A real dispatcher answers 24/7. Tell us the problem and we'll dispatch a local plumber.

  2. 2

    Upfront Written Quote

    Plumber arrives, diagnoses the issue, and gives you a firm price in writing, before any work starts.

  3. 3

    Approve & We Fix It

    You approve the price (or walk away, no obligation). Most jobs done in one visit.

  4. 4

    Wrap-Up & Walkthrough

    Before leaving, the plumber walks you through the repair and cleans up the workspace.

Not sure what to do? Call us first.

Tell our dispatcher what's happening; they'll walk you through immediate steps (shut-off, containment) and dispatch a local plumber to your door.

Call (615) 694-4004

Why We Camera Before We Jet

Four guardrails on every hydro-jet dispatch.

Camera Inspection First

High pressure into a compromised pipe makes a small problem a big one. We scope the line first to confirm condition; clay, cast iron, PVC, ABS; and tune the jet accordingly.

  • Visual confirmation before pressure
  • Pipe-material-appropriate PSI
  • Spot cracks, bellies, root masses ahead of time
Camera scope shown to the homeowner before jetting begins.

Right Tool for the Right Clog

Snake for soft clogs and isolated obstructions. Jet for grease, scale, and root intrusion across long runs. We tell you which fits; and why.

  • Snake when snake is enough
  • Jet when buildup is the cause
  • No upsell to the bigger machine
Diagnosis-first approach.

Cleaner Pipe, Longer Interval

Snaking carves a path through the buildup. Jetting strips the buildup off the wall. The interval before the next clog is measured in years instead of months.

  • Removes buildup, not just punches a path
  • Restores closer-to-original diameter
  • Years of cleaner flow vs months
Before-and-after camera footage saved with the invoice.

Containment & Cleanup

Jetting moves a lot of debris. We bag the discharge, contain splash with tarps, and run the wet-vac on any cleanout overflow. Workspace looks untouched at end.

  • Discharge contained and bagged
  • Wet-vac on every cleanout
  • Photos before-and-after included
Containment before any pressure goes into the line.

Hydro Jetting FAQ

How hydro-jetting works, when it’s the right choice, and what to expect on a jetting dispatch.

How is hydro-jetting different from snaking?
A snake (cable) punches through a clog and pulls some of it out. Jetting blasts water at 1,500–4,000 PSI through the pipe; it scours buildup off the entire pipe wall, not just the obstruction. For grease, scale, or roots, jetting clears more and clears it longer.
Will hydro-jetting damage my pipes?
Not when done right. We camera-scope first to confirm the pipe material and condition, and tune the PSI accordingly. We don’t jet pipes we haven’t scoped; high pressure into a cracked clay or compromised cast iron pipe is how a small repair becomes a sewer-line replacement.
How often do I need to jet a sewer line?
Most homes never need it. If you have mature trees over the sewer line, a known root-intrusion issue, or a restaurant-grade kitchen-line history, every 18–24 months is reasonable. After a one-time jetting, normal residential use rarely needs another for years.
How long does the job take?
A typical residential main-line jetting (with camera scope before and after) is 2–3 hours. Severe root-intrusion jobs or commercial-grade lines can take a half day. We give a upfront quote with the time estimate before starting.
Do I need to be home for the work?
Yes for most residential jetting; we need access to the cleanout (often inside the garage, basement, or yard) and want to walk you through what the camera shows. We coordinate timing around your day.

Don't Live with a Plumbing Problem

Call now and we'll get a plumber to your door. Quote in writing before any work starts.

Dispatch Plumber